SKU#C579 Nightforce
** SUPPLIER DISPATCH** Nightforce ATACR 5-25x56 F1 FFP MIL-C Illuminated Zero Stop Rifle Scope
£3,557.95
£3,202.16
Preorder: Please Contact Us for Lead Time
- Tenebraex Flip Covers are now included with Nightforce ATACR 5-25x56 F1 riflescopes
- First Focal Plane Reticle
- 34mm tube
- Zero Stop
- Digi-Illum illumination system
- Power throw lever
- 120 MOA (35 MRAD) Internal Elevation Adjustment
- 80 MOA (24 MRAD) Windage Adjustment
- Side focus from 45 yards
Please be aware that during our Black Friday sales period there may be a small delay in the dispatch of your order.
Product Information
FIND OUT MORE
DESCRIPTION
** SUPPLIER DISPATCH**
Chances are, you’ll never forget your first look through the ED glass of our ATACR™ 5-25x56 F1. We can assure you that you’ve never seen an image through a riflescope as bright and impressive.
First focal plane technology means consistent reticle values, regardless of the magnification setting. The ATACR 5-25x56 F1 is offered with a wide range of options, including intelligent reticles.
Extensive elevation travel allows target engagements at distances previously considered “out of range,” if you’re willing to practice and if your rifle is up to it. Your riflescope certainly will be.
A capped windage adjustment helps prevent accidental adjustment in the field. The parallax adjustment is marked with approximate numbered distances and is coupled with DigIllum digital reticle illumination. The eyepiece features enhanced engraving, an integrated Power Throw Lever (PTL) and an XtremeSpeed thread for making a fast diopter adjustment. All of these features are paired with intelligent, Nightforce F1 reticles to set a new standard in long range shooting. If there's something this riflescope can't do, we have yet to find it.
Nightforce ATACR 5-25x56 F1 FFP MIL-C Illuminated Zero Stop Rifle Scope
| SPECIFICATIONS | ATACR 5-25 X 56 F1 |
|---|---|
| Focal Plane | First |
| Objective outer diameter | 65 mm |
| Exit pupil diameter | 5x:8.3mm 25x: 2.3mm |
| Field of view @100 yards/100 meters | 5x: 18.7ft 25x: 4.92ft 5x: 5.7m 25x: 1.5 m |
| Eye relief | 85-90mm/3.35-3.54 in |
| Internal adjustment range (MOA/Mil) | e: 120 MOA w: 80 MOA e: 35 Mil w: 23 Mil |
| Click value | .250 MOA .1 Mil-rad |
| Parallax adjustment | 45 yd - ∞ |
| Tube diameter | 34mm/1.34 in |
| Eyepiece outer diameter | 46 mm |
| Overall length (inches/mm) | 15.37 in/390 mm |
| Weight (ounces/grams) | 38 oz/1077g |
| Mounting length (inches/mm) | 5.9 in/150 mm |
| PTL (Power Throw Lever) | Standard |
| Reticles available | MOAR™ MIL-R™ H59™ * TReMoR3™ * |
| Elevation Feature | ZeroStop® |
| Illumination |  (* Non-Illuminated) |
Nightforce ATACR 5-25x56 F1 FFP MIL-C Illuminated Zero Stop Riflescope - Features
- Tenebraex Flip Covers are now included with Nightforce ATACR 5-25x56 F1 riflescopes
- First Focal Plane Reticle
- 34mm tube
- Zero Stop
- Digi-Illum illumination system
- Power throw lever
- 120 MOA (35 MRAD) Internal Elevation Adjustment
- 80 MOA (24 MRAD) Windage Adjustment
- Side focus from 45 yards
MIL-C™ F1 Reticle
Designed to meet the needs of today’s Precision Rifle Series competitor, the MIL-C™ reticle allows for fast and accurate shots on target. The MIL-C™ has a simple center dot for a fine aiming point, while the main lines feature .2 Mil-Radian holds. Each whole Mil-Radian is numbered for fast reference under even stressful conditions.
Range estimation
The Nightforce MIL-C™ reticle can provide you with an accurate distance to your target, when the size of the target is known, by utilizing one of the the following Mil relation formulas:
- (Target Size in Inches ÷ Image Size Measured in Mils in Reticle) x 27.77 = Distance in Yards
- (Target Size in Inches ÷ Image Size Measured in Mils in Reticle) x 25.4 = Distance in Meters
- (Target Size in Centimeters ÷ Image Size Measured in Mils in Reticle) x 10.93 = Distance in Yards
- (Target Size in Centimeters ÷ Image Size Measured in Mils in Reticle) x 10 = Distance in Meters
For example, a standard stop sign measures 30” tall x 30” wide. Knowing the size of the target, in this case, a stop sign, and applying the correct formula above, you will be able to accurately calculate the distance to your target.
- Known target size = 30”
- Image size = 2.5 Mils. To measure image size of target in Mils, refer to the reticle diagram above.
- Divide target size (30”) by image size in reticle (2.5) = 12
- For distance in yards, multiply 12 x 27.77 (constant) = 333.24 yards to target.
- For distance in meters, multiply 12 x 25.4 (constant) = 304.8 meters to target.
Your ability to accurately measure your target in your reticle does take some practice to become proficient.
Limited Lifetime Warranty
We are proud to back up Nightforce ATACR™, B.E.A.S.T.™, Benchrest, Competition™, NXS™, NX8™ and SHV™ riflescopes with a transferable Limited Lifetime Warranty which covers mechanical defects in materials and workmanship in the optical and mechanical components of the riflescope. In the event of a defect in materials or workmanship that is covered by this warranty, we will either repair the riflescope or replace it at no charge, with a comparable product at our discretion.
Exclusions to this warranty include intentional or accidental damage, abuse, misuse, unauthorized modifications or repairs, and improper mounting. This warranty does not cover any consequential or incidental damages resulting from the inability to use the riflescope. Any serial number obliteration or alteration on the product will void the warranty. SHV™ models maintain waterproof integrity with their protective caps installed.
To ensure warranty coverage, please register online or fill out completely and mail in the provided warranty card found in the back of the owner’s manual, along with a copy of the sales receipt. The warranty begins on the date the product was purchased by the original owner. The optical and mechanical components are covered without time limitations. The riflescope’s electronic components are covered for a period of three years.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
Tactical Scope shipping POLICY
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
Note - above DPD link is to our group partner site Opticswarehouse with whom we share logistics and stock. Link opens in new window so you will not lose this page.
COURIERS
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. Our aim is within 1-2 working days but during busy periods dispatch may be delayed by a day or so. If you would like to collect the item in person then please contact us to arrange a time. Collection orders must be paid in advance.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. TacticalScope advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01291 762008 (answerphone, please leave a message for call back with your name and specific call reason) or email [email protected]
-
DPD SHIPMENTS:
Please be advised that we have now introduced DPD Pins to all DPD orders from TacticalScope
If your shipment is being sent from TacticalScope via DPD you will be sent a Pin Code that must be shown to the courier upon delivery.
The pincode is sent VIA email & TEXT message. A valid email address and mobile number must be provided at checkout. Emails will be sent from "Riviera House 3PL" - if you do not receive this email please check your junk or spam folders.
Please note that if you do not display your pin code to the courier driver upon delivery, you will not be able to have your item and you may need to schedule another delivery date to show a valid pin.
After more?
KEEP EXPLORING
CUSTOMER REVIEWS (0)