Schmidt & Bender Competition 10-60x56 LPI Illuminated FFP M1FL DT II+ MTC LT / ST II ZC LT 1cm ccw Rifle Scope
- 34mm main tube
- 23 MRAD of internal adjustment
- Designed for multi discipline shooting
- FFP M1FL Reticle
- DT II + Elevation turret system
- Zero Click
- Locking turrets
- LPI Illumination and Parallax system
- Side Parallax down to 20m
- CCW Turret rotation
Finance Calculator
Representative Calculation
Powered by Autify Digital Ltd
The brand new Schmidt & Bender 10-60x56 is designed for the competition shooter who is after the maximum in precision and accuracy. Whether Bench Rest, F-Class, Long Range or Extreme Long Range, the new Schmidt & Bender 10-60x56 has been developed for the most competitive environments.
The Schmidt & Bender 10-60x56 is part of the latest development from Schmidt & Benders 6x zoom range of optics. The 10-60x56 Schmidt comes with an Illuminated FFP M1FL reticle, the latest Double Turn II+ turret system that incoperates MTC clicks * More Tactile Clicks, a Zero Stop and Locking system; this is really an optical powerhouse that will take some beating. The new optical system at the center for the Schmidt & Bender 10-60x56 helps provide a large field of view, aswell as a generous exit pupil which gives the shooter the ability to get a quick and comfortable viewing experience that will set the new benchmark for high magnification rifle scopes.
The 56 mm objective lens diameter with a light transmission of over 90 % provides a clear, bright and high contrast image even at extreme magnification. The “LPI” enables the use of 11 step illumination and the 20 m to infinity parallax adjustment with one simple handgrip. The riflescope is equipped with a new mrad-based M1FL competition reticle in a first focal plane design.
With a main tube diameter of 34 mm, the Schmidt & Bender 10-60x56 achieves an elevation adjustment range of over 23 mrad. Click values of 0.1 mrad are possible with the Double Turn II+ elevation turret.
Thanks to the use of high-performance aluminum and the special design, this product also ensures the usual Schmidt & Bender stability and allows the riflescope to be used from –40 °C to +61 °C. Despite the solid construction and its superior optical quality, the weight of the 10-60x56 is less than 1000 g.
- Weight (g/oz): 980–995/34.57–35.10
- Length (mm/in): 442/17.40
- Main tube diameter (mm/in): 34/1.34
- Magnification: 10–60
- Objective diameter (mm)/(in): 56/2.20
- Field-of-view (m/100 m)/(ft/100 yd): 4.4–0.8/13.3–2.3
- Field-of-view [USA] (m/100 m)/(ft/100 yd): 3.74–0.64/11.2–1.9
- Exit pupil diameter (mm/in): 5.6–1.0/0.22–0.04
- Eye relief distance (mm)/(in): 90/3.54
- Twilight factor: 23.7–58.0
- Transmission (%): >90
- Focal Plane: 1
- Diopter adjustment (dpt): -3 to +2
- Turrets (Elevation / Windage): DT II+ MTC LT / ST II ZC LT
- Click Value: 0.1 mrad
- Adjustment range elevation: 23.5 mrad
- Adjustment range windage: ±6 mrad
- Turrets (Elevation / Windage): MT II MTC LT / DT II+ ZC LT
- Click value: 0.5 cm/100 m
- Adjustment range elevation: 235 cm/100 m
- Adjustment range windage: ±68 cm/100 m
- Parallax adjustment (m/yd): 20 to ∞/21.87 to ∞
- Illumination: 11 settings
- Waterproof (m)/(ft): 3
- Temperature range: /
- Storage (°C)/(°F): –55 to +71/–67 to +160
- Function (°C)/(°F): –40 to +61/–40 to +142
- Turret rotation: cw/ccw
- Colour: Black
- Reticle: M1FL
- 34mm main tube
- 23 MRAD of internal adjustment
- Designed for multi discipline shooting
- FFP M1FL Reticle
- DT II + Elevation turret system
- Zero Click
- Locking turrets
- LPI Illumination and Parallax system
- The new 10-60x56 features the new “LPI” function – “LPI” means Illumination Parallax Integrated“. This new and very easily operable illumination control is integrated into the parallax adjustment and allows a better mounting solution. It also enables a better left handed use.
- Although being very compact the illumination and the parallax adjustment show the familiar features: on the outer side the smaller and easy to operate illumination knob has 11 functional steps with “off” positions between each step. This allows more contrast on dark targets
- Side Parallax down to 20m
- CCW Turret rotation
M1FL reticle:
THE LATEST GENERATION OF MATCH RETICLES
The M1FL is the latest development for shooting sports based on our well-known LRR-MIL reticle. Our goal was to design a fine mrad reticle in first focal plane, optimized for highest precision disciplines as well as for extreme long range shooting.
Like the LRR-MIL, the M1FL has an interrupted center cross that can be illuminated. It features a fine, free-floating center dot with a coverage of just 0.32 cm at 100 m for precise shot placement and is surrounded by an interrupted center cross with 0.1 mrad gaps and dashes.
Up to the 5 mrad mark, the reticle is graduated in 0.1 mrad subtensions and can be used for holding and measuring over the entire range. For faster orientation, even graduation marks are made downward or to the right and uneven ones correspondingly upward or to the left. From the center, the markings are more clearly highlighted from the 2 mrad mark onwards so that they can be easily noticed even at lower magnifications.
On the horizontal axis, the markings before the 5 mrad mark make it easier to measure oval or round targets. On the vertical axis, the bars are divided into 0.5 mrad subtensions after the 5 mrad mark. On both axes, all 2 mrad marks are additionally numbered up to the 10 mrad mark.
The upper area of the M1FL reticle shows no markings in order to support target and impact identification. The vertical bar extends to the 10 mrad mark and also has a free-floating dot at each of the 5 and 10 mrad marks to allow zeroing above the vertical bar as it is especially common in Extreme Long Range shooting. On the horizontal axis, solid bold conical-shaped bars guide the eye toward the center especially at low magnifications.
What does M1FL stand for? "M1" (=Match 1) stands for the latest generation of competition/shooting sports reticles. As in the past, "F" (=Fine) stands for the fine line pattern and "L" (=Light/Illuminated) for the illumination of the reticle.
Click HERE for more information.
- Schmidt & Bender Competition 10-60x56 LPI FFP M1FL DT II+ MTC LT / ST II ZC LT 1cm ccw Rifle Scope.
- Tenebraex Covers
Schmidt and Bender Lifetime Guarantee:
Schmidt & Bender provides you a 10 year guarantee on the performance of their new riflescopes, which includes a ten years ready on stock parts availability, ten years warranty on assembled parts and a limited two years warranty on electronics.
Tactical Scope shipping POLICY
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
Note - above DPD link is to our group partner site Opticswarehouse with whom we share logistics and stock. Link opens in new window so you will not lose this page.
COURIERS
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. Our aim is within 1-2 working days but during busy periods dispatch may be delayed by a day or so. If you would like to collect the item in person then please contact us to arrange a time. Collection orders must be paid in advance.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. TacticalScope advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01291 762008 (answerphone, please leave a message for call back with your name and specific call reason) or email [email protected]
-
DPD SHIPMENTS:
Download reticle manual 